Efficient Networks 107-0001-000 - Manual (Page 114)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-44 Efficient Networks
®
system name
Sets or changes the name of the local router being configured.
A name must be assigned to the local router. This name is sent to a remote router
during
PAP/CHAP Security Authentication .
Mgmt Class
Security (R/W)
Input Format
system name <name>
Parameters
Example
The following is an example response of name configuration and recall.
Response
Command prompt.
*** Entering the command with no parameter will display the current
router name.
<name>
a,b
a ASCII string
b The system name is case-sensitive and may be no more than 50 characters.
New name of the target router.
-> system name Router1
-> system name
System name: <Router1>