Efficient Networks 107-0001-000 - Manual (Page 347)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 9: L2TP Commands
Efficient Networks
®
Page 9-17
remote setl2tpclient
With this command, this remote is the path to the L2TP client and accepts tunnel
calls. Use this command if your router acts as an LNS. You must also specify PPP
authentication and IP routes for this remote.
Mgmt Class
Security (R/W)
Input Format
remote setl2tpclient <tunnelname><remotename>
Parameters
Response
Command prompt.
<tunnelname>
a,b
a ASCII string
b
The name is case sensitive.
Host name of the remote tunnel associated with the remote LAC.
<remotename> a , b Name of the remote entry.