Efficient Networks 107-0001-000 - Manual (Page 83)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-13
system addsyslogfilter
Limits the Syslog server addresses that may be returned by DHCP. By default, this
validation feature is off.
The Syslog filter can comprise one or more ranges of IP addresses that DHCP may
return for Syslog servers. To delete addresses from the Syslog filter, use the
system
delsyslogfilter command.
This command does not affect the Syslog server addresses that you specify explicitly.
For more information on the router as a Syslog client, see ”
Syslog Client” on page 7-1
of the Technical Reference Guide.
NOTE:
This command does not require a reboot and is effective immediately.
NOTE:
To list the range of allowed clients, use the system list command.
Mgmt Class
Security (R/W)
Input Format
system addsyslogfilter <firstipaddr> [<last ipaddr>] | lan
Parameters
Response
Command prompt.
<first ipaddr>
a
a
Dotted-decimal notation
First IP address of the valid server range.
<last ipaddr> a Last IP address of the valid server range.
b
b
May be omitted if the range contains only one IP address.
lan Local Ethernet LAN.