Efficient Networks 107-0001-000 - Manual (Page 373)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 12: IKE/IPsec Commands
Efficient Networks
®
Page 12-15
Parameters
Example
Response
Command prompt.
ike ipsec policies set peer
Defines a peer filtering parameter value for the policy. The peer parameter specifies
an IKE peer that may be used for the connection. (The peer must have been defined
by IKE peer commands; see “
IKE Peer Commands” on page 5-56. )
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies set peer <peerpame> <policyname>
Parameters
Example
Response
Command prompt.
tunnel | transport Encapsulation method required for the connection. The de-
fault value is TUNNEL.
<policyname> a Name of the IPsec policy to which the encapsulation mode
parameter value is added.
a
a
To see the policy names, use the ike ipsec policies list command.
-> ike ipsec policies set mode transport rtr2rtrpolicy
<peername> Name of an IKE peer.
a
a
Name of an IKE peer. To see the IKE peer names, use the ike peers list command.
<policyname> a Name of the IPsec policy to which the encapsulation mode pa-
rameter value is added.
b
b
To see the policy names, use the ike ipsec policies list command.
-> ike ipsec policies set peer my_aggressive_peer mypolicy