Efficient Networks 107-0001-000 - Manual (Page 73)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-3
system backup successrate Changes the minimum success rate required for a
group of pinged addresses.
system blocknetbiosdefault Sets the default value used when a remote router
entry is defined.
system community Enables changing the SNMP community name
from its default value.
system default modem Lists the default modem settings.
system delbootpserver Removes an address from the BootP server list.
system delhostmapping Undoes an IP address/host translation (remap-
ping) range
system delhttpfilter Deletes an http address filter.
system deliproutingtable Deletes a range of addresses that reference a vir-
tual routing table or deletes the entire virtual rout-
ing table.
system delserver Deletes an server entry.
system delsnmpfilter Deletes the SNMP client range.
system delsyslogfilter Renames a file in the file system.
system delsyslogserver Deletes the Syslog address filter.
system deltelnetfilter Deletes the Telnet client range.
system deludprelay Deletes the UDP port range.
system history Displays the router’s most recent console log.
system httpport Manages the system HTTP port access.
system list Lists the system settings for the target router.
system log Allows logging of the device’s activity in a Telnet
session.
system modem Changes the selected modem setting.
system moveiproutingtable Moves a range of IP addresses to another virtual
routing table.
system msg Sets or changes the message saved in the local
router you are configuring.
Table 4-1: System Command Listing (Cont.)
Command Function