Efficient Networks 107-0001-000 - Manual (Page 54)

Chapter 2: Status Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 2-24 Efficient Networks
®
sntp enable
Enables SNTP requests.
Mgmt Class
Admin (R/W)
Input Format
sntp enable
Parameters
None
Response
sntp offset
Specifies the SNTP offset from the Universal Time Coordinate (UTC). The offset is
specified in minutes. A positive offset is an offset to the east of the Greenwich
meridian; a negative offset is to the west of the Greenwich meridian.
Mgmt Class
Admin (R/W)
Input Format
sntp offset <minutes>
Parameters
-> sntp enable
Current offset from UTC is 0 minutes
Use <system sntp offset> to set time zone
*** When no parameter is entered, current offset is displayed.
<minutes>
a
a
Integer 1 - 59
Number of minutes east or west of the Greenwich meridian. A pos-
itive number is east; a negative number is west.