Efficient Networks 107-0001-000 - Manual (Page 118)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-48 Efficient Networks
®
Parameters
Response
Typical response indicating the curent mode is displayed.
system securemode set cli
Sets the number of concurrent telnet and SSH sessions allowed by the system.
NOTE:
The number of sessions allowed is a system setting and independent of the secure
mode state (enabled or disabled).
NOTE:
If the number of sessions allowed is set to <0>, access to the command line interface
will be available only through the serial console connection.
Mgmt Class
Security (R/W)
Input Format
system securemode set cli <value>
Parameters
Response
Typical response:
enable Enables secure mode.
disable Disables secure mode.
System Secure Mode set to "ENABLED".
<value>
a
a Integer, 0 - 8 (8)
Number of Telnet and SSH sessions allowed.
System CLI limit set to 7.