Efficient Networks 107-0001-000 - Manual (Page 192)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-4 Efficient Networks
®
remote setcompression Enables or disables negotiation of the Stac LZS com-
pression of the payload (RFC 1974).
remote setencryption RFC 1969 encryption. Specifies a PPP DES (Data En-
cryption Standard) 56-bit key with fixed transmit and re-
ceive keys.
remote setencryption Diffie-Hellman Encryption. Specifies encryption based
on the Diffie-Hellman key-exchange protocol.
remote setipoptions Enables or disables the selected IP option for the WAN
interface.
remote setipslaveppp Sets the IP Slave PPP mode.
remote setiptranslate Controls Network Address Translation on a per remote
router basis.
remote setipxaddr Sets the IPX network number for the remote WAN con-
nection.
remote setipxoptions Enables or disables the IPX option RIPSAP for the re-
mote WAN connection.
remote setmaxline Sets the maximum links (1 or 2) for a DOD (dial on de-
mand) connection, that is, a connection where the link
goes up and down.
remote setmgmtipaddr Assigns to the remote router entry, an IP address which
is to be used for management purposes only and not for
IP address translation.
remote setminline Sets the minimum number of channels to be continually
allocated to the connection.
remote setmtu Sets the maximum transfer unit for the remote interface.
remote setourpasswd Sets a unique CHAP or PAP authentication password
for the local router that is used for authentication when
the local router connects to the specified remote router.
remote setoursysname Sets a unique CHAP or PAP authentication system
name for the local router that is used for authentication
when the local router connects to the specified remote
router.
remote setpasswd Sets the CHAP or PAP authentication password that is
used when the remote router establishes a connection
or is challenged by the target router.
remote setphone Specifies the phone number to be used for the dial on
demand (DOD) connection, that is, a connection where
the link goes up and down.
remote setpppoptions Enables and disables a PPP option.
Table 6-1: Remote Command Listing (Cont.)
Command Function