Efficient Networks 107-0001-000 - Manual (Page 367)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 12: IKE/IPsec Commands
Efficient Networks
®
Page 12-9
ike ipsec policies enable
Enables an IPSec policy. An enable command is required for each new policy; the
enable command indicates that the specification of the policy is complete and the
policy is ready to be used. The enable command can also be used to re-enable a
disabled policy. For more information, see “
IKE IPSec Policy Commands” on page 5-
61.
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies enable <policyname>
Parameters
Example
Response
Command prompt.
<policyname>
a
a ASCII string
Name of an existing IPsec policy.
b
b To see the policy names in use, use the ike ipsec policies list command.
-> ike ipsec policies enable mypolicy