Efficient Networks 107-0001-000 - Manual (Page 516)

Chapter 21: Switch Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 21-6 Efficient Networks
®
Response
Typical response:
switch unblock
Re-enables a disabled Ethernet Port. Ethernet ports are disabled with the switch
block command.
Mgmt Class
Network (R/W)
Input Format
switch unblock <port>
Parameters
Response
-> switch status
Port 1 status: No Connection, 10Mb/s , Half Duplex, Enabled
Port 2 status: No Connection, 10Mb/s , Half Duplex, Enabled
Port 3 status: No Connection, 10Mb/s , Half Duplex, Disabled
Port 4 status: Connected , 100Mb/s, Full Duplex, Enabled
Port 5 status: Connected , 10Mb/s, Half Duplex, Enabled
Port 6 status: Connected , 100Mb/s, Full Duplex, Enabled
Port 7 status: Connected , 100Mb/s, Full Duplex, Enabled
Port 8 status: Connected , 100Mb/s, Full Duplex, Disabled
Port 9 status: Connected , 100Mb/s, Full Duplex, Enabled
<port>
1
1
Integer
Ethernet port to be enabled.
-> switch unblock 3
Port 3 is enabled