Efficient Networks 107-0001-000 - Manual (Page 84)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-14 Efficient Networks
®
system addsyslogserver
Adds an address to the list of Syslog servers. The router sends system event
messages to all Syslog servers in the list, unless the Syslog port has been disabled.
For more information about the router as a Syslog client, refer to ”
Syslog Client” on
page 7-1 of the Technical Reference Guide.
To see the server addresses, use the system list command. To remove a Syslog
server address from the list, use the system delsyslogserver command.
NOTE:
The new server address becomes effective after performing a save and a reboot .
Mgmt Class
System (R/W)
Input Format
system addsyslogserver <ipaddr>
Parameters
Response
Command prompt.
<ipaddr>
a
a
Dotted-decimal notation
IP address to be added to the Syslog server address list.