Efficient Networks 107-0001-000 - Manual (Page 46)

Chapter 2: Status Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 2-16 Efficient Networks
®
mlp summary
Lists the status of the protocols negotiated for an active remote connection. The
following are the most common protocols:
• MLP (Multilink Procedure)
• IPNCP (IP routing Network Protocol)
• CCP (Compression Control Protocol)
• BNCP (Bridging Network Protocol)
• IPXCP (IPX Network Protocol)
Mgmt Class
Network (R)
Input Format
mlp summary
Parameters
None
Response
Open - indicates that the protocol is in ready state.
Stopped - means that the protocol is defined, but did not successfully negotiate with
the remote end.
No message (command prompt -> ) indicates that the link is not active.