Efficient Networks 107-0001-000 - Manual (Page 177)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 5: Ethernet Interface Commands
Efficient Networks
®
Page 5-39
eth stop
Stops a logical Ethernet interface.
NOTE:
To keep certain configuration changes, you must enter a save command before
stopping the logical interface.
The stopped interface is disabled until it is started again. To start a logical Ethernet
interface, use the command
eth start . To stop and immediately restart a logical
Ethernet interface, use the command eth restart .
Mgmt Class
Network (R/W)
Input Format
eth restart <interface>
Parameters
Response
Command prompt.
<interface>
a,b
a
Integer, 0, 1 or it may be omitted if the router has only 1 Ethernet interface.
b
To specify a logical interface other than logical interface 0, specify both the port number and the logical
interface number (<port #>:<logical #>, for example, 0:1).
Logical Ethernet interface.