Efficient Networks 107-0001-000 - Manual (Page 75)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-5
system ?
Lists the supported keywords. To see the syntax for a command, enter the command
followed by a ?.
Mgmt Class
All (R)
Input Format
system ?
Parameters
None
Response
A listing of all the supported system commands and keywords with a brief description
of their function.
system addbootpserver
Adds an address to the BootP server list. (The BootP server list is also the DHCP
relay list.)
While the BootP server list has at least one address, the router disables its own
DHCP server and, instead, forwards all DHCP/BootP requests to all servers in the list.
It forwards every reply received from any of the servers in the list to the appropriate
LAN. To read about BootP service, see ”
BootP Service” on page 4-15 of the Technical
Reference Guide.
Addresses can also be added to the list using the dhcp addrelay command. To
remove an address from the list, use the dhcp delrelay command.
To see the current BootP server address, enter the command dhcp addrelay or
system addbootpserver with no parameters. To remove a BootPserver address, use
the command dhcp delrelay or system delbootpserver .
Mgmt Class
Network (R/W)
Input Format
system addbootpserver <ipaddr>