Efficient Networks 107-0001-000 - Manual (Page 86)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-16 Efficient Networks
®
system addudprelay
Create a UDP port range for packet forwarding. You can specify a port range from 0 to
65535; however, 137 to 139 are reserved for NetBIOS ports.
NOTE:
Overlap of UDP ports is not allowed.
Mgmt Class
Network (R/W)
Input Format
system addudprelay <ipaddr> <first port>|all [<last port>]
Parameters
Response
Command prompt.
<ipaddr>
a
a
Dotted-decimal notation
IP address of the server to which the UDP packet will be for-
warded.
<first port>
b
b
Integer, see description above for port range.
First port in the UDP port range to be created.
all Incorporates all the available UDP ports in the new range.
<last port> b Last port in the UDP port range to be created.