Efficient Networks 107-0001-000 - Manual (Page 329)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 8: DHCP Commands
Efficient Networks
®
Page 8-23
dhcp set valueoption
Sets values for global options, options specific to a subnetwork, or options specific to
a client lease. For more information, see “
Setting Option Values” on page 4-8.
Mgmt Class
Network (R/W)
Input Format
dhcp set valueoption [<ipaddr>|<net>] <code> <value>....
Parameters
Example
This example command does not specify an client or subnetwork address, and thus
sets a global value for the domainnameserver option:
Response
Command prompt.
<ipaddr>
a
a Dotted-decimal notation.
Specify the client IP address if the option value applies only to the client
lease.
<Net> a Specify the subnetwork IP address if the option value applies only to
the subnetwork lease.
<code>
b
b
number between 1 and 61 or a keyword. Use the command dhcp list definedoptions to list the codes
and keywords,
Code specifying the option to be set.
<value> Value to be assigned to the specified option. It could be a byte, word,
signed long, unsigned long, binary, IP address, or string depending on
the option.
-> dhcp set valueoption domainnameserver 192.168.254.2 192.168.254.3