Efficient Networks 107-0001-000 - Manual (Page 425)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 14: radius Commands
Efficient Networks
®
Page 14-1
CHAPTER 14
CHAPTER 14
RADIUS COMMANDS
This section contains Radius (RAD) command descriptions. Radius allows access
control and user authentication to be managed from a remote server. For more
information on Access Controland RADIUS, see “
Radius” on page 5-10.
The Radius commands found in this section include:
Table 14-1: Radius Command Listing
Command Function
rad ? Lists the supported radius commands and key-
words.
rad deleteserver Deletes a configured radius server entry.
rad list secret Displays the radius servers shared-secret authen-
tication.
rad list server Displays the IP address and port for the primary
and secondary radius servers.
rad set retries Sets the number of retires to a radius server before
attempting the next radius server, if configured.
radius set secret Sets the authentication secret for the specified radius
server.
radius set server Sets the IP address and port values for the primary
and/or secondary radius server(s).
radius set timeout Sets the number of seconds between retry at-
tempts to the radius server.