Efficient Networks 107-0001-000 - Manual (Page 391)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 12: IKE/IPsec Commands
Efficient Networks
®
Page 12-33
Parameters
Example
Response
Command prompt.
ike peers set localid
Sets the local ID for the IKE peer connection. This command is used when aggressive
mode has been selected by the
ike peers set mode command for this peer name.
The local ID must match the peer ID on the other end of the connection. The local ID
can be an IP address, domain name, or e-mail address as specified by the
ike peers
set localidtype command. For more information, see “ IKE Peer Commands” on page
5-56.
Mgmt Class
Security (R/W)
Input Format
ike peers set localid <aggressivemodeid> <peername>
<ipaddress>
a
a
Dotted-decimal notation
IP address.
<peername>
b
b
ASCII string
Name of the IKE peer whose address is specified.
c
c
To see the peer names, use the ike peers list command.
-> ike peers set address 0.0.0.0 my_aggressive_peer