Efficient Networks 107-0001-000 - Manual (Page 189)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-1
CHAPTER 6
CHAPTER 6
REMOTE COMMANDS
The commands in this section begin with the word remote. The commands allow you
to add, delete, and modify remote routers to which the target router can connect.
Remote router information that can be configured includes:
• PVC numbers
• Phone numbers
• CallerID phone numbers
• Call management
• Bandwidth management
• Security authentication protocols and passwords
• WAN IP/ IPX addresses
• IP routes
• IPX routes and SAPS
• Remote bridging addresses and bridging control
• Host mapping
The remote commands found in this section include:
Table 6-1: Remote Command Listing
Command Function
remote ? Lists the supported remote keywords.
remote add Adds a remote router entry into the remote router data-
base.
remote addbridge Defines the remote router entry as the default bridging
destination for outbound bridging.
remote addhostmapping Remaps a range of local LAN IP addresses to a range
of public IP addresses on a per-remote-router basis.