Efficient Networks 107-0001-000 - Manual (Page 277)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 7: WAN Interface Commands
Efficient Networks
®
Page 7-17
Frame Commands
The following commands are used to manage a frame relay router’s WAN interface.
The Frame Relay commands found in this section include:
frame ?
Lists the supported frame keywords. To see the syntax for a command, enter the
command followed by a ?.
Mgmt Class
Network (R)
Input Format
frame ?
Parameters
None
Response
Lists the supported frame relay commands and keywords and a brief description of
their function.
Table 7-5: Frame Relay Command Listing
Command Function
frame ? Lists the supported frame keywords.
frame cmpplay Selects activation in routing or bridge mode. This com-
mand is applicable only when the router is configured
using Copper Mountain Plug & Play.
frame lmi Turns frame LMI either on or off.
frame stats Displays frame relay statistics.
frame voice Displays the voice DLCI for voice routers.