Efficient Networks 107-0001-000 - Manual (Page 468)

Chapter 18: Stateful Firewall Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 18-2 Efficient Networks
®
firewall ?
Lists the supported firewall keywords. To see the syntax for a command, enter the
command followed by a ?.
Mgmt Class
Security (R)
Input Format
firewall ?
Parameters
None
Response
A listing of all the supported firewall commands and keywords with a brief description
of their function.
firewall seticmpflood-
threshold Sets the threshold value for the number of ICMP
packets per second, which when exceeded, will
cause the firewall to block any subsequent ICMP
packets until the ICMP traffic drops below the
threshold value.
firewall setsynflood-
threshold Sets the threshold value for the number of SYN
packets per second, which when exceeded, will
cause the firewall to block any subsequent SYN
packets until the SYN traffic drops below the
threshold value.
firewall setudpflood-
threshold Sets the threshold value for the number of UDP
packets per second, which when exceeded, will
cause the firewall to block any subsequent UDP
packets until the UDP traffic drops below the
threshold value.
firewall viewdroppkts Displays a listing of up to 200 of the most recent
dropped packets.
firewall watch Enables and disables the console watch for firewall
messages.
Table 18-1: Firewall Command Listing (Cont.)
Command Function