Efficient Networks 107-0001-000 - Manual (Page 287)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 7: WAN Interface Commands
Efficient Networks
®
Page 7-27
IDSL Commands
This section describes the following commands used to manage an IDSL interface.
The IDSL commands found in this section include:
idsl list
Lists the current switch type. To change the switch type, use the idsl set switch
command.
Mgmt Class
Network (R)
Input Format
idsl list
Parameters
None
Response
Typical response:
Table 7-8: IDSL Command Listing
Command Function
idsl list Lists the current switch type.
idsl save Saves the IDSL-related changes across restarts and re-
boots.
idsl set speed Specifies the speed of the IDSL connection.
idsl set switch Specifies link speeds of 64, 128, or 144 Kbps for the
IDSL connection.
remote setdlci Sets the DLCI for the remote router entry.
remote setprotocol Specifies the appropriate link protocol for the IDSL con-
nection.
-> idsl list
Switch type is FR128