Efficient Networks 107-0001-000 - Manual (Page 230)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-42 Efficient Networks
®
Parameters
Response
Command prompt.
remote setbod
Sets the bandwidth on demand (BOD) management option for a DOD (dial on
demand) connection, that is, a connection where the link goes up and down. These
links include those for ISDN, L2TP tunnels, IPSec tunnels, and dial backup.
The bandwidth on demand management option can be set to apply to incoming,
outgoing, or both incoming and outgoing traffic. The bandwidth threshold set by the
remote setbwthresh command applies to the direction of traffic set by this command.
Mgmt Class
Security (R/W)
Input Format
remote setBOD in | out | both <remotename>
Parameters
Response
Command prompt.
<protocol> chap, pap, or none. The default is pap.
<remotename>
a
a
ASCII string
Name of the remote router.
in | out | both Incoming traffic, outgoing traffic, or both. The default is both.
<remotename>
a
a ASCII string
Name of the remote router.