Efficient Networks 107-0001-000 - Manual (Page 463)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 17: SNMP Commands
Efficient Networks
®
Page 17-7
Parameters
Response
Command prompt.
snmp enablesnmpif
Enables SNMP access from the specified interface. To see the current interface(s)
enabled, use the command
snmp list .
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Network (R/W)
Input Format
snmp enablesnmpif <wan|lan>
Parameters
Response
Command prompt.
snmp list
Displays current SNMP configuration information.
NOTE:
If changes to the SNMP configuration have been made since the last reboot, the
changes will be displayed, but may not be in effect until after a
save and reboot .
Mgmt Class
Network (R)
wan | lan Interface from which SNMP access will be disabled.
wan | lan Interface from which SNMP access will be enabled.