Efficient Networks 107-0001-000 - Manual (Page 38)

Chapter 2: Status Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 2-8 Efficient Networks
®
date
Displays or changes the current date on the router’s clock. To change the current
time, use the
time command.
Automatic SNTP requests are generated if the system needs to get the time. You can
specify an SNTP server using the command sntp server () and a UTC offset with the
sntp offset command.
To see the current date and time on the router clock, enter date with no parameters:
Mgmt Class
All (R/W)
Input Format
date <mm/dd/yy>
Parameters
Response
Display when date is entered with no parameters.
Display when date is entered with parameters.
<mm>
a
a
Integer 1-12
Month
<dd>
b
b
Integer 1-31
Day
<yy>
c
c
Integer, indicating a year from 1968 through 2034. Thus, 1/1/4 is January 1, 2004, 1/1/33 is January
1, 2033, and 1/1/78 is January 1, 1978.
Year
-> date
BootTime: 7/1/2001 at 15:42:42
Current time: 7/1/2001 at 15:49:16
-> date 7/1/1
Time set to UTC-420, 7/1/2001 at 15:59:29
Time adjusted for (-) 0 days 0 hours 10 minutes 13 seconds