Efficient Networks 107-0001-000 - Manual (Page 198)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-10 Efficient Networks
®
Examples
The first two addresses in the list represent subnetworks, the third is a class B
network, the fourth is a host, and the fifth address is the default route. The fifth
command adds the default route when the WAN interface is a point-to-point interface;
the sixth command adds the default route when the WAN interface is a broadcast
interface.
Response
Command prompt.
-> remote addIpRoute 10.1.210.64 255.255.255.192 1 HQ
-> remote addIpRoute 10.1.210.032 255.255.255.224 1 HQ
-> remote addIpRoute 172.17.0.0 255.255.0.0 2 HQ
-> remote addIpRoute 10.1.210.072 255.255.255.255 1 HQ
-> remote addIpRoute 0.0.0.0 0.0.0.0 1 HQ
-> remote addIproute 0.0.0.0 0.0.0.0 1 172.16.10.1 HQ