Efficient Networks 107-0001-000 - Manual (Page 462)

Chapter 17: SNMP Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 17-6 Efficient Networks
®
snmp deltrapdest
Deletes the IP address of a current SNMP Trap manager. To view the existing trap
addresses, use the command
snmp list . For additional information, see “ SNMP” on
page 7-2.
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Network (R/W)
Input Format
snmp deltrapdest <ip addr>
Parameters
Response
Command prompt.
snmp disablesnmpif
Disables SNMP access from the specified interface. To see the current interface(s)
enabled, use the command
snmp list .
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Network (R/W)
Input Format
snmp disablesnmpif <wan|lan>
<ipaddr>
a
a
Dotted-decimal notation
IP address of the trap manager that will be deleted.