Efficient Networks 107-0001-000 - Manual (Page 464)

Chapter 17: SNMP Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 17-8 Efficient Networks
®
Input Format
snmp list
Parameters
None
Response
Typical response:
snmp settrapenable
Enables or disables transmission of unsolicited trap event messages to trap
destinations. To see the current Global Trap Enable setting, use the command
snmp
list .
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Network (R/W)
Input Format
snmp settrapenable on | off
-> snmp list
SNMP CONFIGURATION INFORMATION
Community name....................... iads
Port................................. default (161)
IF Enabled........................... LAN only
Clients.............................. all
Global Trap Enable................... on
Configured Trap Destinations......... none