Efficient Networks 107-0001-000 - Manual (Page 240)

Chapter 6: Remote Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 6-52 Efficient Networks
®
NOTE:
To use the management address as the source address for a ping, you must specify it
using the -I option on the
ping command. For example, to use management address
192.168.1.2 when pinging destination address 192.168.100.100, specify:
ping -I 192.168.1.2 192.168.100.100
NOTE:
To use the management address as the source address for a copy, you must specify
both the source and destination addresses on the
copy command.
To list the current management address for the remote router, if any, use the remote
list . To set a management address for an Ethernet interface, see eth ip mgmt .
Mgmt Class
Network (R/W)
Input Format
remote setmgmtipaddr <ipaddr> <mask> <remotename>
Parameters
Response
Command prompt.
<ipaddr>
a
a Dotted-decimal notation
IP address.
<mask> a IP sub-network mask.
<remotename>
b
b
ASCII string
Name of the remote router.