Efficient Networks 107-0001-000 - Manual (Page 371)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 12: IKE/IPsec Commands
Efficient Networks
®
Page 12-13
ike ipsec policies set interface
Defines an interface filtering parameter value for the policy. The policy is only used
when the specified interface is connected. For example, if the policy is to be used only
when the Dial Backup remote is connected, you would specify the remote name as
the interface for the policy. Otherwise, if the policy can be used regardless of the
connected interface, specify the string
none . (To read about Dial Backup, see “ Dial
Backup” on page 6-7. )
NOTE:
The specified interface must be the interface to the IKE peer.
This command is intended to allow the user to choose when to apply IPSec/IKE filters
and incur the resulting encryption and authentication costs. With this command, you
can limit a policy to a specific interface.
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies set interface <interface | all >
<policyname>