Efficient Networks 107-0001-000 - Manual (Page 328)

Chapter 8: DHCP Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 8-22 Efficient Networks
®
dhcp set otherserver
Instructs the router’s DHCP server to either continue or stop sending DHCP requests
when another DHCP server is detected on the LAN.
Mgmt Class
Network (R/W)
Input Format
dhcp set otherserver <net> continue | stop
Parameters
Response
Command prompt.
<net> a
a
Dotted-decimal notation.
IP address of the subnetwork lease.
continue The router’s DHCP server continues sending DHCP requests, even if another
DHCP server is detected on the LAN.
stop The router’s DHCP server stops sending DHCP requests when another DHCP
server is detected on the LAN. (This is the default value.)