Efficient Networks 107-0001-000 - Manual (Page 349)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 10: Bridge Filtering Commands
Efficient Networks
®
Page 10-1
CHAPTER 10
CHAPTER 10
BRIDGE FILTERING COMMANDS
Bridge Filtering allows you to control the packets transferred across the router. This
feature can be used to enhance security or improve performance. Filtering is based
on matched patterns within the packet at a specified offset. Two filtering modes are
available:
• Deny mode will discard any packet that matches the deny filter database and
let all other packets pass.
• Allow mode will only pass the packets that match the allow filter database
and discard all others.
Up to 40 deny and 40 allow filters can be activated from the filter database.
The Bridge Filtering commands found in this section include:
filter br ?
Lists the supported Bridge Filtering keywords.
Mgmt Class
Security (R/W)
Table 10-1: Bridge Filtering Command Listing
Command Function
filter br ? Lists the supported bridge filtering keywords.
filter br add Adds a bridging filter to the filtering database.
filter br del Deletes a bridging filter from the filtering database.
filter br list Lists the bridging filters in the filtering database.
filter br use Sets the filtering mode.