Efficient Networks 107-0001-000 - Manual (Page 295)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 7: WAN Interface Commands
Efficient Networks
®
Page 7-35
sdsl terminal
Displays and/or changes the router’s status as CO or CPE. The router is, by default,
configured as Customer Premises Equipment (CPE). Use this command if to
configure the router as Central Office equipment (CO).
Mgmt Class
Network (R/W)
Input Format
sdsl terminal [cpe | co]
Parameters
Response
Terminal operation is displayed:
*** When entered with no parameters, the current mode is displayed.
cpe Sets the terminal operation mode to CPE.
co Sets the terminal operation mode to CO.
-> sdsl terminal
Customer Premises