Efficient Networks 107-0001-000 - Manual (Page 294)

Chapter 7: WAN Interface Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 7-34 Efficient Networks
®
NOTE:
Enter an sdsl save or reboot command to save SDSL changes across restarts and
reboots.
Parameters
Examples
This command example displays the current line speed, indicates that the line speed
is set by auto-speed detection [AUTO], and lists the available speed options.
This command example requests a line speed of 1152 Kb/s.
This command example shows that the line speed has been changed to 1151 Kb/s
and that auto-speed detection is no longer in effect (the [AUTO] indicator is not
displayed).
Response
See examples above.
*** When entered with no parameters, the current speed is displayed.
<speed> Speed in kbps. a
a
If the auto-speed search is in progress, this command stops the search and sets the line speed as
specified on the command. Auto-speed detection is reinstated if an
sdsl speed <speed> command
is entered.
noauto Overrides auto-speed detection.
b
b If auto-speed detection is disabled, the Link light on the front panel is amber when the line tries to
activate.
-> sdsl speed
SDSL Current Speed: [AUTO] 768 Kb/s
usage: sdsl speed <value in Kb/s> [ 192 384 768 1152 1536 ] | noauto
-> sdsl speed 1152
-> sdsl speed
SDSL Current Speed: 1152 Kb/s
usage: sdsl speed <value in Kb/s> [ 192 384 768 1152 1536 ] | noauto