Efficient Networks 107-0001-000 - Manual (Page 32)

Chapter 2: Status Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 2-2 Efficient Networks
®
erase Erases the entire router’s configuration or parts of
it from FLASH memory.
exit Has the same function as logout , but will discon-
nect the Telnet session.
ifs Lists the communication interfaces installed in the
router and the status of the interfaces.
ipifs Lists the system IP interface(s).
iproutes Lists the current entries in the IP routing table.
ipxroutes Lists the current entries in the IPX routing table.
ipxsaps Lists the current services in the IPX SAPs table.
logout Logs user out (to Login prompt ->) to reinstate ad-
ministrative security.
mem Reports the amount of RAM memory installed in
the router and its current allocation.
mlp summary Lists the status of the protocols negotiated for an
active remote connection.
password Changes the current user password.
ping Transmits an echo message.
ps Lists all of the tasks (processes) running in the sys-
tem and the status of the tasks.
reboot Initiates a reboot of the system.
save Saves the entire router’s configuration or parts of it
to FLASH memory.
sntp active Displays the active SNTP server.
sntp disable Displays the active SNTP server.
sntp enable Enables SNTP requests.
sntp offset Specifies the SNTP offset from the Universal Time
Coordinate (UTC).
sntp prefserver Displays or changes the preferred SNTP server.
sntp request Requests the time from an SNTP server.
Table 2-1: Status Command Listing (Cont.)
Command Function