Atm save, Mgmt class, Input format – Efficient Networks 107-0001-000 User Manual
Page 267: Parameters, Response, Atm speed, Atm save -7 atm speed -7
Chapter 7: WAN Interface Commands
Efficient Networks
®
Page 7-7
atm save
Saves the ATM configuration settings.
Mgmt Class
Network (R/W)
Input Format
atm save
Parameters
None
Response
Command prompt.
atm speed
Sets the speed of the ATM link in kilobits per second.
The default upstream speed is 326 Kb/s. Generally, your Network Service Provider
should provide you with your speed value. If your service provider states your speed
value in cells per second, enter the value using the command
NOTE:
The speed value entered may not be the actual upstream speed attained. When the
command changes the processor clocks, only certain discrete values are allowed.
The speed achieved is the allowed speed value that is equal to or the next lower
value to the value entered.
Mgmt Class
Network (R/W)
Input Format
atm speed [Kb/s]