Efficient Networks 107-0001-000 - Manual (Page 123)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-53
system snmpport
This command manages SNMP port access. It can:
• Disable SNMP for this router (sets the HTTP port to 0).
• Request the default SNMP port (161). This re-enables SNMP after it is
disabled.
• Redefine the SNMP port.
NOTE:
This command is functionally equivalent to the snmp snmpport command.
NOTE:
This command requires a save and reboot to take effect.
To see the current setting, use the command system list . For more information, see
“ Controlling Remote Management” on page 5-15.
Mgmt Class
Network (R/W)
Input Format
system snmpport default | disabled | <port>