Efficient Networks 107-0001-000 - Manual (Page 359)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 12: IKE/IPsec Commands
Efficient Networks
®
Page 12-1
CHAPTER 12
CHAPTER 12
IKE/IPSEC COMMANDS
The commands in this section are used to manage the security features Internet Key
Exchange (IKE) and Internet Protocol Security IPSec). For additional information on
IKE and IPSec, see
Chapter 5, System Security .
The commands found in this section include:
Table 12-1: Internet Key Exchange Command Listing
Command Function
ike ipsec ? List the supported IKE, IPSEC and IKE IPSEC key-
words.
ike commit Defines the remote router entry as a PPPoE re-
mote entry.
ike flush Closes a currently active PPPoE session.
ike ipsec policies add Lists information about the currently active PPPoE
sessions.
ike ipsec policies delete Deletes an existing IPSec policy.
ike ipsec policies disable Disables an IPSec policy.
ike ipsec policies enable Enables an IPSec policy.
ike ipsec policies list List the IPSec policies.
ike ipsec policies set dest Defines a destination address filtering parameter value
for an IPSec policy.
ike ipsec policies set dest-
port Defines a destination port filtering parameter value for
an IPSec policy.
ike ipsec policies set inter-
face Defines an interface filtering parameter value for an IP-
Sec policy
ike ipsec policies set mode Defines the mode filtering parameter value for an IPSec
policy