Efficient Networks 107-0001-000 - Manual (Page 343)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 9: L2TP Commands
Efficient Networks
®
Page 9-13
l2tp set ourtunnelname
Creates local router’s host name.
NOTE:
If this command is not used, then, if it has been specified, the <name> from the l2tp
set oursysname command or the <name> from the command system name
<name> is used.
Mgmt Class
Security (R/W)
Input Format
l2tp set ourTunnelName <name> <tunnelname>
Parameters
Response
Command prompt.
l2tp set remotename
Creates the host name of the remote tunnel.
NOTE:
If this command is not used, then <TunnelName> of the tunnel entry is used.
Mgmt Class
Security (R/W)
Input Format
l2tp set remoteName <name> <tunnelname>
<name>
a,b
a
ASCII string
b
The name is case sensitive.
Host name of the local router. This is the fully qualified domain
name of the local router.
<tunnelname> a , b Name of the tunnel.