Efficient Networks 107-0001-000 - Manual (Page 116)

Chapter 4: System Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 4-46 Efficient Networks
®
system passwd
Sets the system authentication password for the target router that is used when the
router connects to other routers or is challenged by them. This password is a default
password used for all remote sites unless a unique password is explicitly defined for
connecting to a remote router with the
remote setourpasswd command.
Mgmt Class
Security (R/W)
Input Format
system passwd <password>
Parameters
Response
Command prompt.
system riptimer
Sets the duration, in seconds, for Routing Information Protocol (RIP) information to be
exchanged with remote routers. For additional information on RIP, refer to the
Technical Reference Guide and see “
RIP Controls” on page 6-4.
Mgmt Class
Network (R/W)
Input Format
system riptimer <seconds>
Parameters
<password>
a,b
a
ASCII string
b
The password is case-sensitive and should be no more than 40 characters.
Authentication password of the target router.
*** When entered with no parameter, the current setting is displayed.
<seconds>
a
a
Integer, minimum 15 (30)
Timer value for RIP information exchange.