Efficient Networks 107-0001-000 - Manual (Page 458)

Chapter 17: SNMP Commands Efficient Networks ® Router family
Command Line Interface Guide
Page 17-2 Efficient Networks
®
snmp ?
Lists the supported SNMP commands and keywords. To see the syntax for a
command, enter the command followed by a ?.
Mgmt Class
Network (R)
Input Format
snmp ?
Parameters
None
Response
Lists the supported SNMP commands and keywords and a brief description of their
function.
snmp addsnmpfilter
Validates SNMP clients by defining a range of IP addresses that are allowed to
access the router via SNMP. This validation feature is off by default.
NOTE:
This command is functionally equivalent to system addsnmpfilter .
NOTE:
This command does not require a reboot and is effective immediately.
NOTE:
To list the range of allowed clients, use the command system list when you are logged
in with read and write permission (be sure to log in with password). To delete
addresses from the SNMP filter, use the command
snmp delsnmpfilter or system
delsnmpfilter .
For more information on SNMP, see.
Mgmt Class
Security (R/W)