Efficient Networks 107-0001-000 - Manual (Page 193)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 6: Remote Commands
Efficient Networks
®
Page 6-5
remote setppppretrytimer Enables or disables the PPP retry timer for a remote
session.
remote setprefer Changes the interface for the remote entry.
remote setprotocol Sets the link protocol for the remote router.
remote setpvc Specifies the PVC number for connecting to the remote
router.
remote setrmtipaddr Sets the WAN IP address for the remote router.
remote setspeed Specifies the speed to be used when dialing out using
the backup V.90 modem connected to the console port.
remote setsrcipaddr Sets the IP address for the target WAN connection to
the remote router.
remote settimer Sets the length of the timeout period before disconnec-
tion.
remote start If the remote is not currently active, this command at-
tempts to start an active session.
remote stats Shows the current status of the connection to the re-
mote router, including the bandwidth and data transfer
rate.
remote stop If the remote is active, this command stops the active
session.
remote unbindipvirtual-
route Removes a remote route from the named IP virtual rout-
ing table.
Table 6-1: Remote Command Listing (Cont.)
Command Function