Efficient Networks 107-0001-000 - Manual (Page 55)

Efficient Networks ® Router family
Command Line Interface Guide
Chapter 2: Status Commands
Efficient Networks
®
Page 2-25
Response
sntp prefserver
Displays or changes the preferred SNTP server. (The preferred server is the server
that should be attempted first when a request is made.)
To specify a server preference, specify the number of the preferred server within the
SNTP server list. To see the SNTP server list, enter
sntp server .
To see the active SNTP server (that is, the server that last responded to an SNTP
request), use the command
sntp active .
NOTE:
To make this change permanent, a save must be performed before a reboot .
Mgmt Class
Admin (R/W)
Input Format
sntp prefserver <number>
Parameters
Response
When entered with no <number> parameter:
-> sntp offset
Current offset from UTC is 0 minutes
Use <system sntp offset> to set time zone
usage: sntp offset <Minutes from UTC>
(offset is negative for west, positive for east of Greenwich meridian)
-> sntp offset -360
*** When no parameter is entered, current preferred server displayed.
<number>
a
a Integer
Number of a server within the SNTP server list.
-> sntp prefserver
The preferred SNTP server is 1 (192.6.38.127)