Counter, Code, Facility – Siemens MC55 User Manual

Page 111: Obile

Advertising
background image

MC55 AT Command Set

5.3 AT^SPIC

s

m

obile

MC55_ATC_V01.05

Page 111 of 469

2/10/04

Confidential / Released

If the responses to "

AT+CPIN

?" and "

AT+CPIN2

?" both read "READY", there is no currently required password,

and the referrer of the execute command "AT^SPIC" is explicitly undefined.
In these cases, the read command "AT^SPIC?" may be used to determine, which password the response of the
execute command actually refers to. Also, the write command may be used in order to retrieve the counter for a
specific password.

The write command returns the number of attempts still available for entering the password identified by

<facility>

, e.g. the PIN, PIN 2, PH-SIM PIN etc.

Parameter Description

Number of attempts for the currently required password. This number will be counted down after each failure.

password for which the corresponding PIN counter is to be displayed .

“SC“

SIM PIN or SIM PUK. If the SIM PIN has been deactivated after three failed
attempts, the counter for SIM PUK will be returned instead.

“PS“

"phone code" or "device code" (cf.

AT+CLCK

and

AT+CPWD

). If incorrectly

entered three times, the Master Phone Code is required to lift the lock and the
number of remaining attempts for the master phonecode will be returned.

“P2“

SIM PIN 2 or SIM PUK 2. If the SIM PIN 2 has been deactivated after three
failed attempts, the counter for SIM PUK 2 will be returned instead.

“PN“

Network Personalisation

Identification of the currently required password.

SIM PIN

ME is waiting for SIM PIN1.

SIM PUK

ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to
enter PIN1.

SIM PIN2

ME is waiting for PIN2, when the attempt to access PIN2 requiring features was
acknowledged with +CME ERROR:17 (e.g. if client attempts to edit the FD
phonebook).

SIM PUK2

ME is waiting for PUK2 to unblock a disabled PIN2. Necessary if preceding
command was acknowledged with error +CME ERROR:18.

PH-SIM PIN

ME is waiting for phone-to-SIM card password if ''PS'' lock is active and user
inserts other SIM card than the one used for the lock. (''PS'' lock is also referred
to as phone or antitheft lock).

PH-SIM PUK

ME is waiting for Master Phone Code, if the above ''PS'' lock password was
incorrectly entered three times.

PH-NET PIN

ME is waiting for network personalisation password

PH-NET PUK

ME is waiting for network personalisation unblocking password

Notes

• Whenever the required password changes,

<counter>

changes to reflect that change. Please refer to the

examples below.

<counter>

(num)

<facility>

(str)

<code>

(text)

Advertising