Siemens MC55 - Manual (Page 197)

MC55 AT Command Set
8.6 AT^MONI
s
m
obile
MC55_ATC_V01.05 Page 197 of 469 2/10/04
Confidential / Released
8.6 AT^MONI Monitor idle mode and dedicated mode
Syntax
Command Description
The execute command can be used to retrieve the cell parameters of the serving/dedicated cell on request.
The write command can be used to retrieve information of the serving/dedicated cell automatically every
<period>
seconds. To stop the presentation type "AT" or "at".
Parameter Description
Display period in seconds
1...254
Notes
• The two header lines (see 8.6.1 ) are output after every ten data lines.
Test Command
AT^MONI=?
Response(s)
^MONI:
(list of supported
<period>
s)
OK
Exec Command
AT^MONI
Response(s)
See: 8.6.1
OK
Write Command
AT^MONI= <period>
Response(s)
See: 8.6.1
OK
PIN ASC0 ASC1 MUX1 MUX2 MUX3
! % % % % %
Reference(s)
SIEMENS
<period>
(num)