Siemens MC55 - Manual (Page 396)

MC55 AT Command Set
16.4 AT+CLVL
s
m
obile
MC55_ATC_V01.05 Page 396 of 469 2/10/04
Confidential / Released
• As an alternative to
AT+CLVL
, you can use
AT^SNFO
and
AT^SNFV
. The parameter
<level>
is identical with
<outStep>
used by both commands.
• Any change to
<level>
(or
<outStep>
) takes effect in audio modes 2 to 6. That is, when you change
<level>
(or
<outStep>
) and then select another mode with
AT^SNFS
, the same step will be applied.
The only exception is audio mode 1 which is fixed to
<level>
=4 (or accordingly
<outStep>
=4).
•
<level>
(or
<outStep>
) is stored non-volatile when the ME is powered down with
AT^SMSO
or reset with
AT+CFUN
=1,1.