Siemens MC55 - Manual (Page 249)

MC55 AT Command Set
10.4 AT+CGAUTO
s
m
obile
MC55_ATC_V01.05 Page 249 of 469 2/10/04
Confidential / Released
10.4 AT+CGAUTO Automatic response to a network request for PDP
context activation
Syntax
Command Description
The test command returns the values of
<n>
supported by the MT as a compound value.
The write command disables or enables an automatic positive response (auto-answer) to the receipt of a
Request PDP Context Activation message from the network. It also provides control over the use of the V.25ter
basic commands
ATS0
,
ATA
and
ATH
for handling network requests for PDP context activation.
Parameter Description
0 Disable automatic response for network requests for GPRS PDP context acti-
vation. GPRS network requests are manually accepted or rejected by the
AT+CGANS
command.
Test Command
AT+CGAUTO=?
Response(s)
+CGAUTO:
(list of supported
<n>
s)
OK
Read Command
AT+CGAUTO?
Response(s)
+CGAUTO: <n>
OK
Write Command
AT+CGAUTO=
[
<n>
]
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
GSM 07.07
<n>
(num)