Siemens MC55 - Manual (Page 64)

MC55 AT Command Set
3.1 AT+CMER
s
m
obile
MC55_ATC_V01.05 Page 64 of 469 2/10/04
Confidential / Released
Unsolicited Result Code
+CIEV: <indDescr> , <indValue>
A value of an indicator has changed.
Command Description
The read command returns the URC presentation mode
<mode>
and among others, the indicator event reporting
status
<ind>
.
The write command enables and disables the presentation of "
+CIEV
:
<indDescr>
,
<indValue>
" URCs.
<indDescr>
refers to the name of a "
+CIEV
" indicator and
<indValue>
is the new value of this indicator. All
registered indicator events will be issued to the TE.
Parameter Description
0 (&F) Discard "
+CIEV
" and "
^SLCC
" URCs.
1 Discard "
+CIEV
" and "
^SLCC
" URCs when TA-TE link is reserved, e.g. in
online data mode. Otherwise they are forwarded directly to the TE.
2 Buffer "
+CIEV
" and "
^SLCC
" URCs in the TA while TA-TE link is reserved, e.g.
in online data mode, and flush them to the TE afterwards. Otherwise they are
forwarded directly to the TE.
3 Forward "
+CIEV
" and "
^SLCC
" URCs directly to the TE. If MC55 is in online
data mode, URCs are signaled via sending BREAK (100ms) and stored in a
buffer. Once it is back in command mode e.g. after
+++
was entered, all URCs
stored in the buffer will be output.
0 (&F) Keypad event reporting is not supported by MC55.
0 (&F) Display event reporting is not supported by MC55.
0 (&F) Disable indicator event reporting.
2 Enable indicator event reporting.
0 (&F) TA buffer of URCs defined within this command is cleared when
<mode>
1..3
is entered.
Name of indicator; for a list of all supported indicators please refer to
AT+CIND
and
AT^SIND
.
Value of indicator; for a list of all values for the supported indicators please refer to
AT+CIND
and
AT^SIND
.
<mode>
(num)
<keyp>
(num)
<disp>
(num)
<ind>
(num)
<bfr>
(num)
<indDescr>
(str)
<indValue>
(num)