Siemens MC55 - Manual (Page 379)

MC55 AT Command Set
15.5 AT^SPBC
s
m
obile
MC55_ATC_V01.05 Page 379 of 469 2/10/04
Confidential / Released
15.5 AT^SPBC Search the first entry in the sorted telephone book
This command can be used to retrieve the index of the first entry starting with selected character
<schar>
in the
sorted list of phonebook records of the phonebook currently selected with
AT+CPBS
.
The sorted list of phonebook records can be accessed with AT command
AT^SPBG
. The sort order is described
in Chapter 15.1, page 370 .
CAUTION: Please note that the sorted entries are assigned an index of their own which is not identical with the
location numbers used in the various phonebooks. Therefore, the index retrieved with command AT^SPBC com-
mand can be used only as an index for
AT^SPBG
. Do not use the listed index numbers to dial out or modify
entries.
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
Syntax
Command Description
The test command returns the list of phonebooks for which AT^SPBC is supported, in the syntax used for phone-
book selection in AT command
AT+CPBS
).
Test Command
AT^SPBC=?
Response(s)
^SPBC:
"FD","SM","ME"
OK
ERROR
+CME ERROR
Write Command
AT^SPBC= <schar>
Response(s)
^spbc: <index>
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1 MUX2 MUX3
% % % % % %
Reference(s)
SIEMENS