11 at^snfi set microphone path parameters, Incalibrate, Inbbcgain – Siemens MC55 User Manual
Page 406: At^snfi, Incali, Brate, Obile, Mc55 at command set
Advertising
MC55 AT Command Set
16.11 AT^SNFI
s
m
obile
MC55_ATC_V01.05
Page 406 of 469
2/10/04
Confidential / Released
16.11
AT^SNFI Set microphone path parameters
Syntax
Command Description
TA sets microphone path amplifying.
Parameter Description
ADC gain adjustable in eight 6 dB steps from 0 dB to 42 dB (0=0dB, 7=42dB, 8 steps of 6 dB).
0...7
Multiplication factor for input samples. Formula to calculate the negative gain (attenuation) of the input signal:
Gain in dB = 20 * log (inCalibrate / 32768)
0...32767
Test Command
AT^SNFI=?
Response(s)
^SNFI:
s) , (list of supported
s)
OK
Read Command
AT^SNFI?
Response(s)
^SNFI:
,
OK
Write Command
AT^SNFI=
Response(s)
OK
PIN
ASC0
ASC1
MUX1
MUX2
MUX3
!
%
%
%
%
%
Reference(s)
SIEMENS
<inBbcGain>
(num)(^SNFW)
<inCalibrate>
(num)(^SNFW)
Advertising